Short answer: hold it on a weekday morning, send individual invitations about a week ahead, and build the room for three audiences instead of one: writing press, photographers, camera crews. In Muck Rack's State of Journalism 2026, published in March 2026, 78 percent of journalists say they want to be approached before noon, and 88 percent delete a pitch that misses their beat on sight. The result is usually decided in the invitation email rather than in the room. What follows: choosing the day and hour, building the media list, what the invitation should say, room layout, the press audio splitter, lighting and LED settings for camera, running the Q and A, and how to measure coverage afterwards.
What day and time should a press conference start?
Morning. The public relations module published by Türkiye's Ministry of National Education for vocational training puts the best window for cultural, artistic and social press conferences between 10.00 and 14.00. Muck Rack's summary of eight years of journalist surveys points the same way: 78 percent of journalists want to be approached before noon. Stack the two and the practical window narrows to roughly 10.00 to 11.30, because a morning event still makes the midday bulletin and the evening news. The day of the week matters less than people think. In the same summary, 50 percent of journalists say they do not care which day they are approached, and of those who do, 18 percent pick Monday. Then comes the clash check. The ministry module warns against scheduling a press conference during a major football match or a national ceremony; add rate decisions, a rival's launch and ministry announcements to that list. Keep the whole thing to 45 minutes. Camera crews arrive at least 45 minutes early to set up, so say in the invitation what time the room opens.
Who gets invited? Accuracy beats list size
The inbox is full. Muck Rack's 2026 survey found that 29 percent of journalists receive 6 to 10 pitches on a normal working day, 14 percent get more than 20, and 54 percent seldom or never reply to any of them. In the same survey, 43 percent say they rarely receive anything that matches what they cover, and 88 percent immediately disregard a pitch outside their beat. The rule that follows is blunt: one mass invitation to 300 media contacts will not deliver half of what 30 well-chosen names deliver. Build the list by reporter, not by outlet. Inviting the business desk to a car launch, or a tech reporter to a retail opening, produces a long list and an empty room. Format matters too. In the survey, 62 percent prefer to be approached by one-to-one email and 50 percent name mass emails as a reason to delete. The sample was 1,044 journalists surveyed between 30 January and 2 March 2026, weighted towards the United States. Turkish newsrooms behave much the same way; the difference shows up in who keeps the list current.
What belongs in the invitation, and when do you follow up?
Keep it short. In Muck Rack's summary, 69 percent of journalists prefer pitches under 200 words. The survey also says what to put in them. Asked what a PR professional should offer alongside a pitch, 70 percent said clear relevance to their beat, 58 percent interview access to the right source, 40 percent original data or research, 37 percent high-resolution images and 33 percent exclusive or embargoed content. Pre-written quotes scored 14 percent and social media copy 3 percent. So the first line carries the news, the second says who will speak, the third names the data you are releasing. Address, floor, parking and setup time sit in a block at the bottom. One follow-up is enough: 50 percent of journalists call a single follow-up ideal and 51 percent want it 3 to 7 days later. Chasing harder backfires, since 46 percent list repeated unanswered follow-ups among their reasons for deleting. The working calendar is simple. Invitation a week out, reminder two days out, short confirmation on the morning itself.
Build the room for three audiences at once
A press conference room serves three users whose needs collide. Writing press want to sit, hear and take notes. Photographers want a clean angle on the lectern. Camera crews want a fixed position and clean audio. The layout falls out of that: lectern with a branded backdrop behind it, theatre-style seating facing it, a raised camera platform behind the seats, and open floor at the front sides where photographers can move. Make the backdrop wide enough to fill the frame above the speaker's shoulders. In practice that means no narrower than 3 metres, with the logo repeated across the width, because a single centred logo can fall outside a tight shot entirely. Print it matt; a glossy surface bounces the key light straight back into the lens. If the lectern height is fixed, keep a 10 centimetre riser on hand for a shorter speaker. Put an accreditation desk at the entrance and print names and outlets on badges in a size people can actually read. Finally, set aside a quiet interview corner. Television crews want one-to-one time the moment the session ends, and if that happens in the middle of the room, the sound of chairs being stacked ends up in the recording.
The line item everyone forgets: the press audio splitter
Bad audio on the evening news usually starts with every crew pushing its own microphone towards the lectern. The fix is a press audio splitter, known in the trade as a mult box. It takes the feed from the mixer and divides it into balanced outputs, so every crew records the same clean sound. Plan for at least twice as many outputs as the cameras you expect, place the box next to the camera platform and leave spare XLR cable beside it. If you hear hum, a line isolation transformer solves it. Put two microphones on the lectern, one as backup, and scan wireless channels in the room beforehand; in congress centres the system next door often sits in the same band. The Q and A needs two handheld wireless microphones and two runners to carry them, because passing a microphone down a row eats minutes. Record the whole session separately as well. For transcripts, social cutdowns and any later argument about what was said, that recording is the only reliable record you have.
What the camera sees: lighting and LED settings
Light that looks good to the eye often looks wrong on camera. Two rules cover most of it. First, one colour temperature: mix daylight from a window with a tungsten spot and the speaker's face turns blue on one side and orange on the other, so close the curtains or set every fixture to the same kelvin value. Second, soft light from the front: a single overhead spot digs shadows into the eye sockets, while a large source facing the lectern evens the face out. If you are using an LED wall, ask about its refresh rate. According to The Broadcast Bridge's virtual production guide, typical refresh rates for broadcast LED walls are 3840 Hz and 7680 Hz, and that figure refers to the panel's pulse width modulation rate rather than its frame rate. A low refresh panel scrolls in bands on camera. Raising the refresh rate does not solve everything either: moiré comes from the pixel pitch of the wall clashing with the camera sensor, and it is usually cured by changing angle, distance or focus. Run a camera test at rehearsal, shoot the wall, and pull the brightness down to suit the lens. Do not leave this test to the morning of the event.
Running the Q and A, and preparing the spokesperson
Plan 20 minutes of presentation, 20 minutes of questions and 5 minutes of slack. The moderator has exactly one job on stage: hold the order, ask each questioner for a name and outlet, and refuse a third consecutive question from the same person. Spokesperson prep splits in two. First, the data. Every number you announce needs a source behind it, because a figure nobody challenges in the room gets challenged in print the next day. Second, the tone. In Muck Rack's survey, 71 percent of journalists delete pitches written in overly promotional language, and the same reflex operates in the room; an inflated claim turns the angle of the story against you. Have a sentence ready for questions you cannot answer: I do not have a firm figure today, we will come back to you in writing before the end of the day. If you are using an embargo, state the time in the invitation and the press kit with identical wording. Exclusive or embargoed content is valued by 33 percent of journalists in the survey, but an embargo only holds when everyone gets the same hour.
The first 24 hours after, and how to measure coverage
The press kit should go out as the session ends. Put high-resolution photographs, short b-roll, the speech text, the data file and a direct phone number for the contact person in it; 37 percent of journalists in the survey ask for high-resolution images and 40 percent for original data. Send it to the people who could not attend as well, because the story often comes from a reporter who was not in the room. On measurement there is a standard worth following. Barcelona Principles 4.0, published by the measurement body AMEC in 2025, states in its fifth principle that invalid measures such as advertising value equivalents should not be used, and that the contribution of communication should be measured by its outcome and impact. The sixth principle asks reports to cover outputs, outcomes and impact together. In plain terms: article count and reach are outputs, what the message did to your audience is the outcome. How many articles carried your core message, how many interview requests arrived, what happened to branded search volume, how many enquiries reached the sales and dealer side. Tales Event handles launches and press conferences end to end across Türkiye, from venue selection and backdrop production to sound, lighting, LED screens, the press audio splitter and the live stream. Send us the date, the number of speakers and the number of camera crews you expect, and we will draw the room plan and the technical list with you.
Let's talk about your event
Tell us your idea and we will prepare the concept and quote.